Fig. 14 Cp39Xx-0010_Cp-Link 4, Cu8802-00X0; Fig. 15 Cp39Xx-0010_Cp-Link 4, Cu8803 - Beckhoff CP39 Series Manual

Fig. 14: CP39xx-0010_CP-Link 4, CU8802-00x0
When installing the CP39xx-0010 with the CU8803 transmitter box, the industrial PC is likewise connected to
the transmitter box via USB and DP/DVI. The transmitter box is then connected to the control panel via the
CP-Link 4 connection of the transmitter box using a CP-Link 4 cable. With this box, USB, DP/DVI and power
supply can be transmitted together via the cable (One Cable Display Link). Be careful not to connect an
additional power supply to the CP39xx-0010 to avoid property damage. Figure 15 shows the wiring with the
CU8803.
Fig. 15: CP39xx-0010_CP-Link 4, CU8803
The following ordering options are available for the transmitter boxes:
• CU8802-0000: DVI-to-DVI cable included in the box
CP39xx
CP-Link 4 (100 m)
CU8802-0000 0000
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CP-Link 4 (100 m)
CU8803-0000
CP-Link 4 (100 m)
CP-Link 4 (100 m)
Version: 3.6
Product overview
19