Display - Heat Output Indicator, Further Function Menus - Austroflamm Ruby Operating Manual

Ruby / Percy / Polly 2.0 / Polly light
The warning or error icons appear only when a warning or error is detected. The error is displayed
in detail by touching the icon.
The icon "Heating time activated" is only displayed if heating times are programmed in the timer
menu.
The optionally available SMART SPOT - a radio-controlled thermostat - works in the stove.
Display – Heat output indicator, further function menus
Heat output level
Heating times
By pressing the appropriate icon, it is possible to switch to the desired setting or function.
The desired heat output can be set by pressing the buttons
Start / Stop
By pressing the
Display – Status indicator
Start / Stop
By pressing the
Air distribution mo-
dule
(optional)
Statistics
button for longer than 2 seconds, the stove is activated or stopped.
Status bar Start / Stop function
Room temperature indicator
button for longer than 2 seconds, the stove is activated or stopped.
5
Tips
Settings
. This setting is accepted immediately.
english
Back to room
temperature indicator
Start / Stop
function