Function - Air Distribution Module, Fan Speed Control; Function- Fill Level Indicator; Function- Timers, Setting Heating Times; Setting A New Heating Time Or Editing The Heating Time - Austroflamm Ruby Operating Manual

Ruby / Percy / Polly 2.0 / Polly light
6 english
Function – Air distribution module, fan speed control
An air distribution module is available as an option for the RUBY model. This allows an additional room to be
heated using warm air. The warm air is extracted in front of the rear wall of the firebox.
For installation and any other information, please contact your Austroflamm dealer.

Function- Fill level indicator

The fill level indicator informs you of the fill level of your pellet hopper.
If the fill level falls below a certain value, a warning is shown on the dis-
play. The fill level indicator must be updated manually each time the
pellet hopper is filled.
Care should be taken to prevent the hopper from becoming com-
pletely empty, otherwise the fire will go out unintentionally and you
the screw conveyor will have to be filled manually before the next pel-
let start.
The fill level indicator is calculated according to the size of the pellet
hopper of your stove and the corresponding operating time. To en-
sure the stove functions correctly, always fill the tank to the top, while
setting the indicator to "FULL" at the same time.
Press the fill level icon in the room temperature indicator to set the
display to "FULL".
This function can be deactivated in the setting "Menu item: Fuel".

Function- Timers, setting heating times

activate heating times
back
By pressing the "TIMERS" button in the menu list, the "Heating
times" menu can be accessed.
Activate the heating times by pressing "ON" at the top right of the
display.
A maximum of three heating times per day can be saved.
A total of six different heating times can be saved.
Set a new heating time
Edit heating time