AX Seri es-St andard I nst ruct i ons Manual
P1.1 Introduction
Thank you for purchasing our product. The AX series motion controller provides a high-level motion control system
based on CODESYS to integrate the control function of PLCs and Motion Control.
This manual introduces Delta self-developed function blocks and functions for customers to perform PLC application
development.
P1.1.1 Applicable Products
This manual applies to the following products:
-
AX-3 Series
P1.1.2 Associated Manuals
1. DIADesigner-AX User Manual
Includes the information of software operation, programming languages (Ladder Diagram, Sequential function
charts, ST (Structured Text) and function blocks), concept of POU and Task, as well as motion control
programming.
2.
AX-3 Series Operational Manual
Introduces the concept of motion control system, while gives the information of hardware and software
configuration, motion control programming framework, troubleshooting, analog input-output module and
temperature measurement module
Pref ace
2