Introduction; Features; Specifications - Delta DVPDT02-H2 Operation Manual

1

Introduction

1. To ensure correct installation and proper operation of DVPDT02-H2, please read this chapter carefully
before using your DVPDT02-H2.
2. This chapter only provides introductory information on DVPDT02-H2. Details of DeviceNet protocol are not
included. For more information on DeviceNet protocol, please refer to relevant reference or literatures.
3. DVPDT02-H2 is a DeviceNet slave communication module, used for the connection between DeviceNet
network and DVP-EH2 series PLC MPU.
1.1

Features

Supports Group 2 only servers.
Supports explicit connection in the pre-defined master/slave connection group.
Supports polling.
Supports EDS files in DeviceNet network configuration tools.
The length of I/O data can be freely configured through DeviceNet network configuration tool. Re-power
it to make effect the configuration.
I/O data is extendable to 200 bytes.
1.2

Specifications

DeviceNet connection
Transmission method
Electrical isolation
Interface
Transmission cable
Communication
Message type
Serial transmission
speed
Electrical specification
Voltage
Current
Environment
Noise immunity
Operation
Storage
Vibration/shock
resistance
Certificates
DVP-PLC Operation Manual
DeviceNet Slave Communication Module DVPDT02-H2
CAN
500VDC
Removable connector (5.08mm)
2 communication cables, 2 power cables, 1 shielded cable
I/O polling; explicit
125 kbps; 250 kbps; 500 kbps (bits per second)
24VDC (Range: 11 ~ 25VDC)
28mA (typical), 125mA impulse current (24VDC)
ESD (IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV
Analog & Communication I/O: 1KV
Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
0ºC ~ 55ºC (temperature); 50 ~ 95% (humidity); pollution degree 2
-25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
Standard: IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC 61131-2 & IEC 68-2-27
(TEST Ea)
IEC 61131-2, UL508
3