Introduction To Rtu-Pd01; Product Introduction; Features - Delta RTU-PD01 Operation Manual

PROFIBUS DP Slave Communicaion Module RTU-PD01
1

Introduction to RTU-PD01

1.1

Product Introduction

1. Thank you for choosing Delta RTU-PD01 PROFIBUS DP Slave Communication Module. To ensure
correct installation and operation of the product, please read this operation manual carefully before
using it.
2. This operation manual only provides introductory information on RTU-PD01. Detailed information
about PROFIBUS DP protocol is not included in this manual. Please refer to relevant literatures for
more information on PROFIBUS DP protocol.
3. RTU-PD01 is a PROFIBUS DP slave communication module for connecting Delta's Slim series
special I/O modules, digital I/O modules and standard Modbus devices to PROFIBUS DP network.
1.2

Features

1. Supports PROFIBUS DP cyclic data transmission.
2. Auto-detects baud rates; supports max. 12Mbps.
3. Self-diagnosis
4. Able to connect to max. 8 DVP-Slim type special I/O modules (i.e. analog I/O, temperature
measurement, counter and positioning modules) and 16 digital I/O modules (max. 256 digital I/O
points).
5. The RS-485 COM port is able to connect to max. 16 standard Modbus slave stations.
6. Supports max. 100 bytes of data input and 100 bytes of data output.
2 DVP-PLC Operation Manual