Table of Contents
Advertisement
7.4
BIOS Update
Before downloading a BIOS, please check the following:
Make a bootable diskette which includes the following files:
DELEP200.exe
»
Phlash16.exe
»
Core BIOS (SM200_xxx_FLASHABL.ROM)
»
Rename the SM200_xxx_FLASHABL.ROM file to bios.rom
»
IMPORTANT:
Do not use boot disks created in a Windows operating system. If you do not have an MSDOS 6.22 disk
available, you can download a boot disk from www.bootdisk.com.
Notes:
Disable the EMM386 or other memory managers in the CONFIG.SYS of your boot disk.
Make sure that the Phlash.exe program and the BIOS are in the same path and directory!
Boot DOS without config.sys and autoexec.bat. (Press F5 while starting the DOS boot).
Start the DOWNLOADING process:
1. Start the system with the bootable diskette.
2. Run DLDELEP.exe to clear the CMOS and the EEPROM.
Warning
If you do not run DLDELEP.exe, the system will be destroyed during the BIOS upgrade!
3. Run PHLASH16.EXE BIOS.ROM /BBL
4. Reboot system and press F2 to enter the setup mode. Set the default values with F9.
5. "Save and leave" the setup with F10.
6. Reboot system
45
MSM200X/XP/XU & SMA200 / BIOS Operation
www.kontron.com
Advertisement
Table of Contents
