Table of Contents
Advertisement
Available languages
Available languages
Intensive cleaning
Except with the AUTO dishwashing pro-
gramme
and the short programme
you can select the additional option "Intensive
cleaning".
• The "Intensive cleaning" option can be
– activated by pressing the
The indicator
(11) will appear on the
display.
– deactivated by pressing the button
again. The indicator will disappear from
the display.
Activate/deactivate automatic
door opening
(2) (3)
The "Automatic door opening" function is
activated as standard.
• In order to
– deactivate the 'Automatic door opening'
function, press and hold the
(3) buttons simultaneously until the
indicator (11) goes out. The appli-
ance door remains locked when the pro-
gramme has reached the drying phase.
– activate the "Automatic door opening"
function, press and hold the two buttons
simultaneously again until the
tor (11) illuminates.
,
(5) button.
(1 1)
(2) and
indica-
Dishwasher operation
Half load
(3)
Select the "Half load" option if you would like
to run the appliance with less than 6 place
settings. This additional option reduces water
and power consumption.
The "Half load" option is not available with the
programmes
and
• The "Half load" option can be
– activated by pressing the
The indicator
(15) will appear on the
display.
– deactivated by pressing the button
again. The indicator will disappear from
the display.
Delayed start
(2)
1/2
(8)
The wash cycle normally starts as soon as
you press the 'Start/Pause' button
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button
(2) as many times as
necessary for the display (8) to show the
delay required (
,
H: 0 0
Page EN-23
(15)
1/2
.
(3) button.
(6)
(6).
to
).
H: 0 1
H: 2 4
Advertisement
Chapters
Table of Contents
