Uplift Desk FRM240 Manual page 9

Pneumatic standing desk

Step 9 - Frame and Control Paddle Attachment

A. With two people positioned on opposite ends of the frame assembly holding the Side Bracket with one hand and the

Leg with the other, gently begin to rotate the frame toward the back so the Control Paddle and cable are facing up and

the back ends of the Feet and Side Brackets are resting on the ground.

Note: Mind the Control Paddle cable as you flip the frame.

B. Readjust your grip on the Side Bracket and Leg and

gently rotate the frame again until it is upside down

with the Side Brackets resting on the ground and

the Feet facing up as shown.

C. Carefully lift the frame and position it onto the bottom

surface of the desktop so the long ends of the Side

Brackets are facing the edge of the desktop with the

Control Paddle Adapter (C8) attached. When positioning

your frame on the desktop, lift it up. DO NOT SLIDE THE

FRAME. This will help protect the underside of your

desktop from scratches.

upliftdesk.com

Table of Contents