Advertisement
Step 13 - Tighten Control Paddle Cable
A. To prevent possible injury, the Control Paddle
cable is shipped in a loosened state so it can't
accidentally activate the pneumatic legs. The cable
will need to be tightened before the pneumatic legs
and desk are functional.
B. Turn the cable tension knob clockwise until the
Control Paddle is firm with no loose movement.
C. Check the actuation of the Control Paddle by depressing
it. Slightly adjust the knob until the action is smooth and
to your liking.
Step 14 - Install Screw Cover Badges
A. Install the Screw Cover Badges (C10) by
pressing the posts on the back side of the
badges into the two holes in each of the Side
Brackets near the attachment screws.
Work Better. Live Healthier
upliftdesk.com
info@upliftdesk.com
800-349-3839
512-614-3152
SAVE THE INSTRUCTIONS
Study this manual carefully. If this product is sold,
please provide this manual to the buyer, installers, or
support personnel operating the product.
Copyright Notice: This guide is a component of this UPLIFT Desk product. This guide is a part of
©
the scope of delivery, even if the item is resold. This guide is also available on the UPLIFT Desk
website: upliftdesk.com. These specifications are subject to United States copyright law.
AI-FRM240-1.1
Advertisement
