Related Manuals for Uplift Desk FRM413
Summary of Contents for Uplift Desk FRM413
- Page 1 ® 4-Leg Standing Height Side Table Frame two person assembly For assembly assistance, visit upliftdesk.com/FRM413 355 lb call 800-349-3839 or email support@upliftdesk.com Patent Pending, ©2020 UPLIFT Desk®. All Rights Reserved...
- Page 2 Thank you for choosing UPLIFT Desk.
-
Page 3: Safety And Warnings
M8x8 Set screw #10-3/4’’ #10-24x3/4’’ Washer Allen wrench H2 a H2 b (qty 16) Screw Screw (qty 8) (qty 8) (qty 8) tape measure, and Phillips head screwdriver CONFIGURATION © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com... - Page 4 (Step 5 will help you determine which holes to use depending on your desktop’s size). If needed, adjust the width of the frame in order to properly align all of the holes. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 5 Insert the eight remaining M8x8 Set screws (H1) into the Crossbar ends (four on each side) to secure each Crossbar rail, then tighten using the Allen wrench (H4). © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 6 (do not drag it) by holding onto the part of the Leg assembly that is secured to the desktop. Note: Never lift by holding on to the Desktop itself, as this will put undue stress on the screws. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
- Page 7 Notes © UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com...
- Page 8 Copyright Notice: This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide ©...