Advertisement
Step 5 - Leg Shipping Bracket Removal
Remove the plastic shipping bracket from the top of
each Leg as shown and discard.
Step 6 - Side Bracket Attachment
A. Align the holes in the side of the Right Side
Bracket (C5) with the holes on the Leg with
the Control Paddle. The long end of the
Side Bracket should be facing the same
direction as the long end of the Foot as
shown.
B. Loosely insert two M5 x 12 Flat Head
Screws (H3) through the side of the Side
Bracket and into the Leg. Do not tighten
the screws.
C. Repeat the previous steps to loosely
attach the Left Side Bracket (C6).
D. Loosely insert two more M5 x 12 Flat Head Screws into the
holes in the top of each of the Side Brackets as shown.
E. Once all four screws have been started in each Side
Bracket, tighten them using the 3mm Allen Wrench (H7).
© UPLIFT Desk • 800-349-3839 • info@upliftdesk.com •
Make sure the long end of the Side
Brackets face the same direction
as the long end of the Feet.
upliftdesk.com
7
Advertisement
