Procedure 7. Attach The Usb Device (Optional) - Verathon GlideScope Core Operation & Maintenance Manual

Procedure 7.
Connecting a USB drive to one of the USB ports allows you to export exams that were saved to the internal
memory. The ports also allows a Nonin 3231 USB External Pulse Oximeter to be attached. The SpO
reading from the sensor is shown on the Core display for convenience, but should not be used for diagnostic
purposes.
1. On the back panel of the monitor, remove the rubber cover from the USB and HDMI connector panel.
2. Connect the USB device to the one of the USB ports.
3. If you connect a USB drive, the display shows a USB icon
to use.
If you are using a pulse oximeter, the SpO
Operations & Maintenance Manual: Setting Up
Attach the USB Device (Optional)
2
Connector panel cover
USB ports
to indicate a drive is attached and available
information from the pulse oximeter appears on the screen.
2
31
0900‑5017 REV‑07