SOLTEK SL-85MR2 Manual page 68

ACPI Standby State This item allows you to select the ACPI Suspend
Power Management/
Video Power Down
Hard Disk Power
Down Mode
Standby Time Out
(Minute)
Suspend Time Out
(Minute)
Power Button Function allows you to set power Button function.
Restore on AC/Power
Resume on Ring Allows you to enable / disable the Resume on Ring
Resume on LAN Allows you to enable / disable the Resume on LAN
type. You can select S3(STR) for suspending to
DRAM if your system supports this mode. Or you
can select S1 (POS) for Power on Suspend under
Windows 98 ACPI mode..
Allows you to enable / disable the Power manage-
ment / Advanced Power Management function.
APM
Allows you to select the Video Power Down Mode.
Choices: Disabled; Standby; Suspend
Mode
Allows you to select the Hard Disk Power Down
Mode.
Choices; Disabled; Standby; Suspend
To set the duration of Standby Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
To set the duration of Suspend Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
Choices: On/Off; Suspend
Allows you to set the restore state from AC/Power
Loss Loss.
Choices: Last State; Power Off; Power On
Signal function.
An input signal on the serial Ring Indicator (RI) Line
(in other words, an incoming call on the modem)
Awakens the system from a soft off state.
function.
Chapter 4 BIOS Setup
73