2-8.2 Jbat 1: Clear Cmos - SOLTEK SL-85MR2 Manual

85MR2 / 85MR2-L

2-8.2 JBat 1: Clear CMOS

When you have problem with rebooting your system, you can clear
CMOS data and restore it to default value. To clear CMOS with Jumper
JBAT1, please follow the steps below:
1. Power off system;
2. Set JBat 1 to Pin 2-3 closed.
3. After 2 or 3 seconds, restore the JBat 1 setting to Pin1-2 closed.
4. CMOS data are restored to default now. Remember never clear
CMOS when system power is on.
2-8.3 Jp1: K/B or Power Button Select
Jp1 is designed to select keyboard or the Power button as the power-
on controller. Setting Jp3 to 1-2 closed will allow user to power on sys-
tem by power button. Setting Jp3 to 2-3 closed will allow user to power
up system by keyboard. Yet user still has to enter BIOS Setup for choos-
ing the K/B Power-on mode. (See Integrated Peripherals" in BIOS
Setup.)
JBat 1:
Clear CMOS
1
1-2 closed (default)
To hold data
1
2-3 closed
To clear CMOS
Jp 1:
K/B or Power Button
Select
1
1-2 closed (default)
To power on by Power
Button
1
2-3 closed
To power on by keyboard
28