Figure 40 Third Sensor Calibration Screen; Figure 41 Fourth Sensor Calibration Screen - Quantronix Cubiscan 110-XT Operation And Technical Manual

Calibration
Cubiscan 110-XT
7. Tap to continue, and the following screen is displayed.
[Next]
8. Place the calibration cube on the platform in the forward position, as
shown above. Be sure the cube is centered on the back edge of the
platform.
9. Tap to continue, and the following screen is displayed.
[Next]
10. Place the calibration cube in the up position, as shown above.
Calibrating the ultrasound sensors
Figure 40
Third sensor calibration screen
Figure 41
Fourth sensor calibration screen
44