Table of Contents
Advertisement
Figure 21
Configure sub-menus
Operation
This option displays functions that can be enabled on the Cubiscan 110-XT.
By tapping the corresponding box on the touchscreen, you can turn on or
off functions which display the dimensional weight, or enable a barcode
for more
scanner, a printer, or auto measure. See
"Operation" on page 31
details.
When the Enable Auto Measure feature is selected, an item will be measured
NOTE
when it is detected on the platform.
In this sub-menu, you can also set the display's language, regulator setting,
and protocol. You can also set a password to be entered for full
functionality of the Cubiscan 110-XT. See
for more
"Password" on page 33
information on setting the password.
Units
You can switch between metric and standard units under the Units
sub-menu. You can also change the dimensional factor to be domestic or
international. Additionally, you can change the dimensioning factor or give
the Cubiscan 110-XT a unique ID by tapping on the numbers to bring up a
keypad. See
for more details.
"Units" on page 33
Ethernet
This option displays details about the Ethernet connection, with an option
to post data to a specified URL. See
for more
"Ethernet" on page 34
information, or see the Cubiscan web services manual.
Other
The Other option allows you to set the date and time, as well as update
firmware if needed. See
for more details.
"Other" on page 36
Advertisement
Table of Contents
