Figure 23 Home Screen; Figure 24 Configure Operation - Quantronix Cubiscan 110-XT Operation And Technical Manual

Configuration
Display
dim-weight
Enable barcode
Enable printer
Enable expanded
protocol
Cubiscan 110-XT
1. From the home screen, tap
2. The configuration menu is displayed at the bottom of the screen. Select
the option if it is not already selected.
Operation
Check this box if you want the dim-weight and factor to be displayed on
the home screen.
Check this box if you want to enable a barcode scanner to work with the
Cubiscan 110-XT. If this box is enabled a new barcode field will appear on
the home screen. The
for the barcode option to work.
Check this box if you want to enable a printer to work with the Cubiscan
110-XT. When this box is enabled a label will be printed each time a
measurement is taken.
Enabling the expanded protocol allows more information to be sent in a
data packet. When this option is disabled, the Cubiscan 110-XT is
CONFIGURE
Figure 23
Home screen
Figure 24
Configure Operation
Enable Expanded Protocol
System configuration
.
box must also be checked
32