Table of Contents
Advertisement
Setup
Placement
Cubiscan 110-XT
2. Place the bolt and washer in the adjacent hole and tighten securely so
they are flush with the side of the Cubiscan platform.
Repeat these steps with the other three bolts.
The Cubiscan 110-XT is designed to be operated in a warehouse
environment; however, for proper operation the following conditions
should be met if possible.
•
Do not subject the Cubiscan to extremes in temperature or humidity.
Locate the Cubiscan as far from open freight doors as possible. Heaters
or air conditioners should not blow directly on the Cubiscan.
•
Protect the Cubiscan from static electricity, especially the display.
•
Place the Cubiscan on a flat, sturdy surface as free from vibration as
possible. Excess vibration can reduce the accuracy of the Cubiscan
110-XT scale.
•
The Cubiscan's platform is free-floating—it is resting on springs (load
cells). Maintain a minimum of one-inch clearance at the back and sides
Figure 11
Shipping bolt and adjacent hole
Placement
14
Advertisement
Table of Contents
