Figure 3 Cubiscan 110-Xt With Shorter Edge And Front Sensor Marked - Quantronix Cubiscan 110-XT Operation And Technical Manual

Setup Unpacking
Shorter edge
Front sensor
Figure 3
Cubiscan 110-XT with shorter edge and front sensor marked
5. Place the platform on a stable work surface with the front sensor, as
shown in Figure 4, at the front of the work surface.
Examine the container and the Cubiscan 110-XT carefully for any damage.
If, after unpacking, you discover any damage to the Cubiscan 110-XT,
contact the carrier immediately.
Cubiscan 110-XT 7