Table of Contents
Advertisement
Configuration
Units
Dim-factor
Machine ID
Factors
Ethernet
Cubiscan 110-XT
2. The configuration menu is displayed at the bottom of the screen. Select
the
option if it is not already selected.
Units
In this field you can select the units that will be used. The options are
inches (in), centimeters (cm), pounds (lb), or kilograms (kg).
In this field you can select the dim factor that will be used. The options are
domestic and international.
In this field you can enter a unique ID for your Cubiscan 110-XT. This can be
helpful if you have more than one Cubiscan on site.
In this field you can view or change the current dim factor values.
The following table displays the default dimensional weight factors used by
the Cubiscan.
Dimensional factor
Cubic inches per pound
Cubic inches per kilogram
Cubic centimeters per pound
Cubic centimeters per kilogram
This section discusses the options available on the Ethernet menu.
Complete the following steps to access the Ethernet menu.
Figure 26
Configure Units
Domestic
166
366
2720
6000
System configuration
International
139
306
2278
5000
34
Advertisement
Table of Contents
