Table of Contents
Advertisement
Setup
Leveling the Cubiscan 110-XT
Connecting power
Cubiscan 110-XT
of the Cubiscan. Do not rest objects against or set objects on the
Cubiscan when not in use.
•
If a computer is used, place it as close to the Cubiscan as possible. The
operator may need to use the keyboard or mouse on the computer
while cubing and weighing packages using the Cubiscan 110-XT.
After meeting the above criteria as best as possible, complete the
following steps to level the Cubiscan 110-XT, if necessary.
1. Place the Cubiscan 110-XT on a solid, stable surface. Be sure that
nothing touches the back wall or top platform, as this may affect the
scale.
2. Adjust the four leveling feet under the Cubiscan 110-XT to level the
scale. Make sure all feet are touching the supporting surface.
An optional cart and portable power supply are available from Cubiscan to
create a completely mobile cubing, weighing, and identification
workstation.
The Cubiscan 110-XT uses an external AC power adapter. Take the
following steps to connect power to the Cubiscan.
1. Connect the power cord and AC power adapter.
2. Plug the respective ends into a standard power strip equipped with an
ON/OFF switch and the freestanding display. When plugging the
power cable into its port on the freestanding display, be sure to line up
the prongs and place it with the cord's marked arrows on the bottom.
3. Use the power strip switch to turn the Cubiscan on and off (see
"Turning on the Cubiscan" on page
Leveling the Cubiscan 110-XT
16).
15
Advertisement
Table of Contents
