Snap-On TECHANGLE STEEL MICRO Manual page 17

Battery Type Selection
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP

ENTER button.

2. BATTERY TYPE screen is displayed.
3. Use UP  /DOWN


4. Press ENTER

EXIT
SHOW INFO
SLEEP TIME
UP/DOWN buttons
TOGGLE BCKLGHT
VIBRATOR CONFIG
BATTERY TYPE
ENTER
button
Note: Wrench is configured for Lithium battery shipped from factory. If Lithium battery is replaced
with Alkaline or NiMH, battery type should be changed so battery level icon and LOW battery
warnings function optimally. Battery life (REPLACE) will not be impacted, however 50% and Low
will be optimized to show most accurate linear discharge time.
/DOWN


 buttons to select the type of battery being used.

button to accept selection and exit to Settings menu.
ENTER
LITHIUM
button
ALKALINE
NIMH
UP/DOWN buttons
LITHIUM
ALKALINE
NIMH
buttons to highlight


16
BATTERY TYPE selection then press