Advanced Settings - Snap-On TECHANGLE STEEL MICRO Manual

PSET 02
92°
Preset Angle Screen
ENTER button
100.0
Target Torque Screen
Note: Pressing ENTER
PSET.
Note: When a PSET is deleted, all other stored PSET's will retain their original PSET numbers. When a
new PSET is entered, it will be assigned first available PSET number in sequence.

Advanced Settings


Accessing Advanced Settings
Advanced settings are accessed from
1. From target torque or angle screen, press and hold ENTER
2. Highlight SETTINGS

3. Press ENTER

Menu Selections:
 EXIT - Exits Settings menu and returns to target screen.
 SHOW INFO - Displays wrench operational information.
 SLEEP TIME - Displays power down interval setup screen.
 LCD CONTRAST - Displays LCD contrast setup screen.
 KEY BEEP - Displays button press beep enable/disable setup screen.
 AUTO BACKLIGHT - Displays auto backlight enable/disable screen to turn on backlight during
measurement.
 TOGGLE BACKLGHT - Displays BACKLIGHT
screen.
 VIBRATOR CONFIG - Displays vibrator ON/OFF configuration for when target reached.
 BATTERY TYPE – Displays the battery type selection screen.
4. To exit Settings menu and return to target torque or angle screen, press ENTER
EXIT menu selection is highlighted.
00
100.0
IN-LB
Target Screen
Note: All user configurable settings are stored in non-volatile memory and are retained while power
is off.
UNIT
00
DELETE
button
held EDIT
EXIT
UP/DOWN buttons
DELETE
EDIT
EXIT
ENTER button
00
IN-LB

button while

SETTINGS
menu selection using UP
button to display Settings menu.
ENTER
EXIT
button
SET HEAD LENGTH
held
SHOW DATA
UP/DOWN buttons
CYCLE COUNT
LANGUAGE
SETTINGS
EXIT menu selection is highlighted will exit without deleting
menu selection on main menu.
 /DOWN

button toggle or timeout enable/disable
EXIT
ENTER
button
SHOW INFO
SLEEP TIME
11

button for 3 seconds.

 buttons.

button while
