Auto Backlight - Snap-On TECHANGLE STEEL MICRO Manual

Key Beep Setup
This function will allow user to enable or disable audio feedback when a button is pressed.
1. From Settings menu, use UP

ENTER button.

2. KEY BEEP screen is displayed.
3. Use UP /DOWN



4. Press ENTER

EXIT
SHOW INFO
SLEEP TIME
UP/DOWN buttons
SLEEP TIME
LCD CONTRAST
KEY BEEP
ENTER
button
Auto Backlight Setup
This function will allow user to enable or disable backlight from turning on during torque or angle
measurement.
1. From Settings menu, use UP

press ENTER

2. AUTO BACKLIGHT screen is displayed.
3. Use UP /DOWN



4. Press ENTER

EXIT
SHOW INFO
SLEEP TIME
UP/DOWN buttons
LCD CONTRAST
KEY BEEP

AUTO BACKLIGHT

ENTER
button
/DOWN


buttons to highlight ENABLE (factory default) or DISABLE selection.

button to accept selection and exit to Settings menu.
ENTER
KEY BEEP
button
ENABLE
DISABLE
UP/DOWN buttons
KEY BEEP
ENABLE
DISABLE
 /DOWN

button.
buttons to highlight ENABLE (factory default) or DISABLE selection.

button to accept selection and exit to Settings menu.
ENTER
AUTO BACKLIGHT
button
ENABLE
DISABLE
UP/DOWN buttons
AUTO BACKLIGHT
ENABLE
DISABLE
buttons to highlight

 buttons to highlight
14
KEY BEEP selection then press
AUTO BACKLIGHT selection then