Telemetry Troubleshooting Guide
Problem
No telemetry
options are
available
in the
transmitter
The
telemetry
screen is
blank
ESC Troubleshooting Guide
Problem
ESC ON - No
motor func-
tion, audible
tone or LED
Motor-
Stops and
LED blinks
Motor-
Accelerates
irregularly
Possible Cause
You are using a
transmitter that does
not include telemetry
features
Your transmitter is in
5.5ms mode
The telemetry screen
needs to be configured
in the transmitter
telemetry menu
Possible Cause
Battery/connection
issue
Damaged ESC/
switch
Damaged motor
Low voltage
protection
Overheat protec-
tion
Battery issue
Incorrect gearing Adjust/replace gearing
Worn or
damaged motor
Consider changing to
a transmitter which
includes telemetry
Select a different DSMR
protocol, rebind and
then recalibrate
Configure the
telemetry screen
Solution
Recharge/replace battery.
Secure all connections
Repair/replace ESC switch/
ESC
Repair/replace
When the ESC LED blinks,
recharge/replace battery
When the LED blinks, let
motor/ESC cool, change
set up or gearing to avoid
overheating
Repair damaged wiring/
replace battery
Repair/replace motor
Solution
19