To change settings with the programming box:
1. Begin with no battery connected.
2. Connect the cable for the programming box into the
programming port as shown.
3. Connect a battery and power ON the ESC.
OPTIONAL: The ESC settings can be reset to default by
pressing "Reset" and then "OK" buttons.
4. Press Select button on the program box once.
5. Select the programming choices. Press SAVE after any
changes are made.
6. Power off the ESC.
7. Disconnect the cable for the programming box.
Programmable Items
1. Running mode
2. Battery Type Li-Po/NiMH (Li-Po has Low Voltage Cutoff)
3. Cutoff Voltage
4. Start-up Force (%)
5. Max Forward Force (%)
6. Max Reverse Force (%)
7. Max Brake Force (%)
8. Initial Brake Force (%)
9. Drag Brake (%)
10. Drag Brake Rate Control (Level)
11. Neutral Range (%)
12. Start Mode/Punch (Level)
13. PWM Frequency
14. Freewheeling
14