7. Power OFF the system with the ON/OFF switch.
8. Power ON the system with the ON/OFF switch. The system
is ready for operation
Tip: Beeps from the motor may be quiet and difficult to hear,
use the LED status to help verify settings.
Operation
1. Power on the transmitter.
2. Power on the receiver.
3. The green LED on the receiver will be illuminated when it is
connected to your transmitter.
4. Disconnect your battery from the ESC/Receiver after operation.
Failsafe
In the unlikely event that the radio link is lost during use, the
2-in-1 will drive the throttle channel to the neutral (throttle off)
position. If the 2-in-1 is powered on prior to turning on the
transmitter, it will enter failsafe mode, leaving throttle off. When
the transmitter is turned on, normal control will resume.
Programming and Update Ports
Receiver Update Port
- +
ESC Programming Port
12