Install the IFP bleed screw into the IFP. The bleed screw should be
21
submerged in fluid.
Remove the shock from the vise. Pour the fluid out of the IFP reservoir.
22
Spray isopropyl alcohol in the IFP reservoir and clean it with a rag.
Clamp the shaft eyelet into the vise so the shock is vertical.
Apply a thin layer of grease to the IFP reservoir cap o-ring. Push the IFP
23
reservoir cap into the IFP reservoir until the retaining ring groove
is visible.
T10 TORX®
Shock Assembly and Bleed
32