Use a strap wrench to remove the air can. Wrap the strap around the
6
section of the air can furthest from the shaft eyelet. Turn the wrench
counter-clockwise to unthread the air can.
NOTI CE
Do not place the strap wrench on the air can decal.
Once it is completely unthreaded, slowly pull the air can along the
damper body to remove it and the Counter Measure™.
Remove the rag from the damper body eyelet.
Vacuum pressure will increase as you pull the air can along the
damper body, and will suddenly release when the air can is pulled
over the air piston.
Strap Wrench
Counter Measure
Air Can Removal
14