Front Runner JADA010 Quick Start Manual

Hi-lift jack bracket

ENG

front runner

hi-lift Jack bracket

JADA010

READ ME !

Thank you for purchasing a Front Runner Hi-Lift Jack Bracket.

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

Please call us if you have any questions about the installation of this product.

JADA010_REV_B05

Table of Contents

Need help?

Do you have a question about the JADA010 and is the answer not in the manual?

Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Page 2 GET ORGANIZED Here is what you are looking at for JADA010 IN THE BOX IN THE BOX IN THE BOX IN THE BOX CONTINUED IN THE BOX IN THE BOX M8x30 Button Head Bolt (Black) M10x40 Hex Bolt M8 Nut Cap...
Page 3 Decide where on your Rack you would like to mount the Hi-Lift Jack. The brackets can be orientated upwards, downwards, front to back and back to front. Refer to Page 4, showing the various mounting options. JADA010_REV_B05 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 4 RECOMENDED POSITIONS IMPORTANT WARNING! IMPORTANT WARNING! THIS POSITION IS NOT SUITED FOR A HI LIFT JACK. JADA010_REV_B05 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 5 Assemble the machined pin and securing bolt in hole patern suited to your jack. 17mm Fit and Secure the handle clamp in the desired position, using fasteners shown in Figure 1.2 13mm JADA010_REV_B05 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 6 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...