Table of Contents
Advertisement
Operation and Installation Manual PBTC-300
3
Performance Description
The Junction Box with Thermostat Module is intended for use in trace heating systems in hazardous areas. The operation together
with a Resistance Temperature Device Pt100 and BARTEC heating cables type PSB, MSB, HSB+ or HTSB is certified. Mounting
material for heating cable types PSB and MSB is included in the Junction Box with Electronic Thermostat Module. The CAK kit SRB
is required for mounting the heating cable types HSB+ and HTSB. It must be ordered separately.
The Thermostat Module is a temperature controller type ETM-25Ex-C and meets the requirements of IEE-E/IEC/EN 60079-30-1.
The LED status display shows the current operating status of the device by means of color and flash codes. The connection of the
Resistance Temperature Device Pt100 is intrinsically safe. The temperature setpoint is set by means of 3 rotary coding switches.
21-54C3-7D0002/-
Notice: Technical data subject to change without notice.
01/2022-EHT-441169
No claims for damage arising from alternations, errors or misprints shall be allowed.
Seite 6 / 49
Advertisement
Table of Contents
