Operation and Installation Manual PBTC-300
Insert the 2 fixing screws (ISO 1207, M6x35) into diagonally located holes of the junction box
Install the junction box on the base plate
Install on each of the 2 fixing screws:
a washer (ISO 7092, M6)
a split washer (DIN 127, Type B, M6)
a nut (ISO 4032, M6)
Tighten the screws using a screwdriver
21-54C3-7D0002/-
Notice: Technical data subject to change without notice.
01/2022-EHT-441169
No claims for damage arising from alternations, errors or misprints shall be allowed.
22
Seite 27 / 49