Operation and Installation Manual PBTC-300
Push back the grounding braid
Form an eyelet using the screwdriver
Take care not to damage the internal insulation jacket
Bend the trace heater
Pull out the heating element of the grounding braid
Twist the grounding braid in order to form a pigtail
21-54C3-7D0002/-
Notice: Technical data subject to change without notice.
01/2022-EHT-441169
No claims for damage arising from alternations, errors or misprints shall be allowed.
Push the green/yellow tube onto the twisted grounding
braid
Remove 115 mm of the internal insulation jacket
Take care not to damage the bus wires
8
9
10
11
12
Seite 23 / 49