Pre-Maintenance Procedures; Accessing Internal Components - Exmark VERTEX V Series Operator's Manual

Maintenance
Pre-Maintenance
Procedures
Accessing Internal
Components
Service Interval: Yearly—Apply anti-seize
compound to the cushion
knobs.
You can release the cushion for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Loosen the twist knobs on each side of the
machine.
1. Twist knob
3. Lower the cushion to the platform.
4. Remove the rear access cover.
Figure 43
2. Cushion
Figure 44
5. Perform any maintenance or adjustment on the
machine.
6. Install the rear access cover.
7. Raise the cushion, and slide it onto the pins on
both sides of the machine.
8. Tighten the twist knobs.
g375719
g377627
36