Safety And Instructional Decals - Exmark VERTEX V Series Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
133-8061
137-8127
1. Attention—do not spray with high-pressure water.
144-0275
1. Batteries are flammable
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
decal133-8061
1. Positive terminal
2. Read the Operator's
Manual.
3. Recycle the battery.
decal137-8127
1. Traction drive
2. Parking brake
3. Power takeoff
(PTO)—disengaged
decal144-0275
4. Fast
8
144-0277
4. Do not dispose
improperly.
5. Do not expose to fire.
144-7003
5. Slow
6. Neutral
7. Reverse
decal144-0277
decal144-7003