Exmark VERTEX V Series Operator's Manual page 10

Safety
146-1269
1. Negative rake
2. Increase
147-1681
1. Height of cut
147-0288
1. Warning—read the Operator's Manual for instructions
on torquing the blade bolt/nut to 75 to 81 N∙m (55 to
60 ft-lb).
decal146-1269
3. Home position
4. Positive rake
decal147-1681
decal147-0288
1. Keep the battery at a
temperature above 0°C
(32°F) and below 45°C
(113°F)
2. Warning—read the
Operator's Manual
before performing
battery maintenance; do
not operate the machine
when the battery charger
is connected; disconnect
the battery charger
before operating the
machine.
1. Warning—light is bright; do not look directly into the light.
10
147-0289
3. Lift the cover to charge
the battery.
147-0290
decal147-0289
decal147-0290