Exmark VERTEX V Series Operator's Manual page 19

Diagnostics Menu
Menu Item Description
Indicates the inputs and outputs
Battery Stack
for the batteries.
Indicates the inputs and outputs
Battery Cells
for individual batteries.
Indicates the inputs and outputs
Cutter Motors
for each cutter motor.
Indicates the inputs and outputs
Traction Motors
for each traction motor.
Settings
Menu Item Description
Controls the language used on
Language
the message display.
Controls the brightness of the
Backlight
LCD display.
Controls the contrast of the
Contrast
LCD display.
Allows you to access protected
Protected Menus
menus by inputting a passcode.
About
Menu Item Description
Displays the model number of
Model
the machine.
Displays the serial number of
SN
the machine.
Displays the software part
number and revision of the main
Main Controller
controller.
Displays the software part
number and revision of the
Display Controller
display controller.
Displays the software part
number and revision of the
Traction Motors
traction motors.
Displays the software part
number and revision of the
Cutter Motors
cutter motors.
Displays the software part
number and revision of the
Battery Packs
battery packs.
Accessing Protected Menus
Note: The factory default PIN code for your
machine is 1234.
If you changed the PIN code and forgot the code,
contact your Authorized Service Dealer for assistance.
Note: The message displays only 2 items at a time;
however, the following figures show the full menus
for context.
1. In the Main menu, scroll down to Settings and
press the button.
2. In the Settings menu, scroll down to Protected
menus and press the
3. To enter the PIN code, use the 2 center buttons to
input each digit, and press the
on to the next digit. Repeat this step until the last
digit is entered and press the
4. Press the button to confirm the PIN code.
19
Operation
Figure 13
button.
Figure 14
button to move
button again.
Figure 15
g375695
g375693
g375692