Managing The Routing And Mixing Of Input Signals - Digigram ALP221e User Manual

User Manual – ALP221e
Pre or post fader Vu-meters
The blue LED button allows selecting if the Vu-meter displays the signal
level before or after the digital gain set via the fader.
To select pre or post fader Vu-meter, click on the blue LED button on the
right of the Vu-meter bar(s), and select the mode.

9.3 Managing the routing and mixing of input signals

Click on the icon to access the "Matrix" view which is used to mix/route input signals towards
the outputs
The mixer can mix all or some of the input signals towards each output. Each output can therefore
receive its own mix of inputs.
As in the "I/O Monitor" view, it is possible to select the inputs displayed in this matrix (physical
inputs-INPUTS and/or software play inputs-PLAYBACK) and the outputs displayed (physical
outputs-OUTPUTS and/or outputs-RECORD).
There are two possible matrix views:
A complete view that shows all the mixing points. This view is displayed when the "MATRIX
●
MODE" selector is positioned on "ADVANCED" (view displayed above).
24