9.1.1. Adjusting the sliding pad
Make sure that the sliding pad is correctly adjusted towards the frame. There should not be any
gap or play between the sliding pad and the frame. The frame must slide easily to center with
the indicator toward the center marker. This adjustment shall be carried out weekly.
If adjustment is needed:
1. Loosen the screws (1).
2. Loosen the nuts (3).
3. Turn the adjustment screws (2) until there is a slight friction between the frame and sliding
pad.
4. Tighten the nuts (3).
5. Tighten the screws (1).
Repeat the adjustment on the opposite side of the tool.
Pos. Description
(1)
Screw
(2)
Adjustment screw
(3)
Nut
(4)
Sliding pad
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(2)
(1)
Fig 94.
(2)
(3)
(3)
(1)
(4)
64 av 82