PANDROL CD200 IQ Operation And Maintenance Manual page 52

4. Lock the handles (1) Fig 67 to secure the slide
carriage in position.
NOTE!
Consider the rail inclination when locking the slide
carriage in position; the main unit has to be tilted
slightly to match the inclination, otherwise it will not
be possible to get it firmly locked.
There should be some force required to close the
latch. If it locks too easily the slide carriage will not
be rigidly locked. This can be adjusted using the
setting bolt for the slide carriage.
Adjust clearance (Fig 69)
1. Loosen the locking nut (1)
2. Adjust the adjudtment screw until there is no
clearance between the adjustment screw (2) and
trolley.
3. Tighten the locking nut (1).
5. Install the brake wire (1) and the plug (2) onto the
trolley. Check the brake functionality.
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
Fig 67.
Fig 69.
(2)
(1)
Fig 68.
(1)
(1)
(2)
52 av 82