PANDROL CD200 IQ Operation And Maintenance Manual page 24

4.4.2. Work head e-CLIPS
The work head is designed to be able to both clip up and
de-clip e-CLIPS. It is also designed to be able to work on
rails with different rail heights.
Pos Description
(1) Parallel adjustment knob
(2) Tower
(3) Frame
(4) Indicator
4.4.3. Indicator
The indicator (1) indicates the position of the double hook relative to the E-CLIPS.
When the indicator is in the INSTALL MODE ZONE (3), the tool is ready to install the clips.
The indicator will move towards the center mark (4) during the clipping operation. The clips are
installed when it reaches the center mark. It will then move back to the starting position and the
cycle is complete.
When the indicator is in the EXTRACT MODE ZONE (3), the tool is ready to extract the clips.
The indicator will move towards the center mark (4) during the de-clipping operation. The clips
are extracted when it reaches the center mark. It will then move back to the starting position and
the cycle is complete.
Pos Description
(1) Indicator
(2) Extract Mode Zone
(3) Install Mode Zone
(4) Center mark
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(3)
Fig 16.
Pos Description
(5) Double hook
(6) Heel plate
(7) Quick locking mechanism
(8) Height adjustment knob
(2)
(8)
(2)
(5)
(6)
(1)
Fig 17.
(1)
(7)
(4)
(3)
24 av 82