PANDROL CD200 IQ Operation And Maintenance Manual page 61

8.3.3. Adjusting the Rubber Stop
The rubber stop (1) can be reversed to fit different types
of clips.
To reverse the rubber stop: (2)
1. Unscrew the four screws (2).
(1)
2. Reverse the rubber stop unit (1).
3. Re-tighten the screws (2).
Fig 87. Rubber stop set to fit FASTCLIP FE
Repeat the procedure on the other side of the work head.
(2)
(1)
Fig 88. Rubber stop set to fit FASTCLIP FC
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
61 av 82
@Pandrol 2023