PANDROL CD200 IQ Operation And Maintenance Manual page 12

1.1.7 Danger due to manual handling
WARNING!
To decrease the footprint of the machine on the transportation vehicle the trolley can be
manually handled and then put on track and the rest of the machine put on top of it using
a crane/hoist. This is the only permitted manual handling in the normal course of events.
Alternatively it can be left on the machine and it can all be mechanically handled.
In an emergency the machine could be manhandled off the track as a whole unit (poerpack/
tool) by 8 people. In the event of lifting equipment failure ONLY it can be broken down into
modules.
1.1.8 Danger due to noise
WARNING!
Risk of permanent damage, particularly to hearing, if the user does not continuously wear
suitable hearing protection. Wear hearing protection. See noice data in section 3.3.
1.1.9 Danger due to vibration
WARNING!
The transmission of vibrations to the human body is harmful to health. Wear padded gloves.
Include other vibration-free activities with mainly vigorous use of the muscles during the
work process. See vibration data in section 3.3.
2.4.1. Operator leaving the machine unattended
When the operator leave the machine unattended, the machine must always be parked
horizontal on the ground. If the machine is placed on the rail the clipping tool shall rest on
the ballast or sleeper. This is to avoid the risk of the machine to tip over or uncontrolled
movement along the track.
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
12 av 82