Table of Contents
Advertisement
5.2.
Control panel
The CD200IQ is easily operated via the control panel. The panel has four menu pages used for
settings and information.
Ì
NOTE!
Settings are made by pressing the buttons on the control panel, not on the icons
on the display.
5.2.1. Menu page "Home"
At startup, the menu page "Home" is displayed, showing
currently active functions.
With the push buttons below the display is used to navigate
between menues, make selections and activate/de-activate
functions.
Pos. Description Fig 21
1
Select clipping/de-clipping mode
2
Select manual/automatic mode
3
Switch menu page
4
Work light On/Off
5
Power down control panel
6
Boost function On/Off
Select function mode (1)
Ext.
De-clipping mode.
Inst.
Clipping mode.
Automatic mode (2)
Auto. Clipping / De-clipping is made automatically.
Man.
Clipping / De-clipping is made manually..
Work light (4)
On
Work light On
Off
Worklight Off
Boost (6)
The Boost function can be used in manual mode to gain extra power at de-clipping if a clip is jammed
due to rust or similar.
Ì
IMPORTANT!
Always make sure that no damage occure during when using the boost function.
Boost In manual mode, higher pressure and more power will be used.
Off
Boost function deactivated.
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
Ext.
Man.
Off
(Hold 'ok' to shutdown)
(1)
(2)
(3)
(4) (5)
Fig 21.
Menu page "Home"
Off
(6)
27 av 82
Advertisement
Table of Contents
