PANDROL CD200 IQ Operation And Maintenance Manual page 55

3. Activate the dead-mans-handle and check that the
clipping shoes are in the right height relative the
clip. This depends on the type and dimension of the
actual rail. If necessary, adjust the height of the work
head with the adjustment screw (1) Fig 73.
The distance (A), Fig 72 should be between 10-13
mm for FASTCLIP FE and 8-11 mm for FASTCLIP
FC.
After clipping the FASTCLIP shall be in the position
recommended by Pandrol. Measure its position and
check with prescription documentation from Pandrol Rail
Fastenings Ltd.
Ì
WARNING!
To avoid injury, ensure the engine is
turned off before adjusting anything on the
machine.
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
(A)
Fig 72.
Fig 73.
(1)
55 av 82