Housing; Process Connection; Approvals And Approval Marks - JUMO EM Series Operating Manual

7 Technical data
7.6

Housing

Material
Mounting
Standard
Extra code 704
Extra code 705
Extra code 710
Setpoint value setting
TR
TW, TB, STB, STW (STB)
Types EM-3, EM-4, EM-30,
EM-33, EM-40, EM-44, EMF-444,
EMF-3333
Setpoint adjuster
Scale range
Protection type
Weight
7.7

Process connection

EM series with capillary
Material
Protection tube up to 150 °C
Protection tube above 150 °C
Insertion length S
Standard
Protection tube Ø
For further process connections and protection tubes see data sheet 606710.
7.8

Approvals and approval marks

DIN
Testing agency
Certificates/certification numbers TR777
Inspection basis
Valid for
DIN
Testing agency
Certificates/certification numbers TW778
Inspection basis
Valid for
34
Galvanized sheet steel
With 2 M3 screws, spaced 22 mm
Switching head mounting with 2 M4 screws, spaced 28 mm
Switching head mounting with 2 M3 screws, spaced 33 mm
Central mounting M10 × 1 with acorn nut (for TB and STB only)
Switching point adjustable from outside with rotary knob.
Switching point adjustable with screwdriver.
Permanently set at the factory to customer requirements.
See data sheet 606715
Standard 250°∠ (for STB and STW (STB)), see table for control ranges and
probes
IP00 according to EN 60529
Approx. 300 g
Plain cylindrical probe "10" (standard)
Screw-in protection tube "20" (upon request)
Screw-in sleeve with screw-in spigot G 1/2, form A, according to DIN 3852/2
and clamping piece with fixing screw for securing the probe
CuZn (standard)
CrNi
100, 120, 150, 200 or 300 mm (other lengths upon request)
D = 8 mm, D = 10 mm
DIN CERTCO/TÜV Süd
DIN EN 14597
EM-1
DIN CERTCO/TÜV Süd
DIN EN 14597
EM-2, EM-3