Table of Contents
Advertisement
Figure 1: OUTDOOR - MOUNTING CLEARANCES [Indoor Clearances Page 10]
NOTE: MAXIMUM HEATER ANGLE IS 30° TO AVOID DAMAGE
Note: Ensure mounting height in any location is sufficient to prevent patrons from coming in
contact with heater, and clearance to combustible material is maintained.
Table 1: OUTDOOR - MINIMUM MOUNTING & CLEARANCES TO COMBUSTIBLES
QTY
Application
OUTDOOR
OUTDOOR
OUTDOOR
Do not mount less than 8 ft above floor.
Do not store or place anything directly under heater
See Table 2 Next Page for "Suggested Mounting Height for Comfort"
The clearance to combustible material represents the minimum distance that must be main-
tained between the outer heater surface and a nearby surface. In an OUTDOOR application
the stated clearance to combustibles represents a surface temperature of 117F° [65C°] above
ambient temperature.
It is the installer's responsibility to ensure that building materials with a low heat tolerance
which may degrade at lower temperatures are protected to prevent degradation. Examples of
low heat tolerance materials include awnings, vinyl siding, fabrics, some plastics, filmy materi-
als, etc.
MODEL NO
2135/ IO-135 -N\L
2150/IO-150 -N\L
2152/IO-152 -N
Ends Under
Horizontal
E
U
A
14"
45"
13"
14"
60"
16"
14"
60"
16"
7
30° Angle
S
T
B
14"
17"
9"
19"
20"
8"
19"
20"
8"
2100 / IO-100 Manual
RD: AUG 2021
F
60"
62"
62"
IM110107
R.L. 11A
Advertisement
Table of Contents
