Table of Contents
Advertisement
JP-2100-CB-K: Universal Mounting Kit for Patio Heaters
Component Quantities and Material Specifications each Kit:
2 x Ceiling/Wall Bracket - 12 ga. [0.102"] 316 S/S
2 x 24" [610 MM] Channel Leg - 12 ga. [0.102"] 316 S/S
2 x Heater Attachment Bracket - 12 ga. [0.102"] 316 S/S
12 x ¼" x ¾" Stainless Steel Bolts
12 x ¼" Stainless Steel KEP Nuts
[lock washer attached]
Note: It is the installer's responsibility to ensure:
Adequate mounting strength and integrity
to the structure using field supplied 3/8" lag
screws or bolts
Maintain required clearances to combustibles
from heater
Refer to manual: heater weights; required
clearances
Assembly:
The 24" Channel Leg can be cut to a shorter length
Ensure required clearances to combustibles from heater are maintained
Fasten the Ceiling/Wall Bracket and Heater Attachment Bracket to the Channel Leg using
two supplied ¼" bolts at each connection as illustrated.
The arc of holes in the Ceiling/Wall Bracket allows angling of the Channel Leg from the
bracket up to 45°, and/or mounting the bracket to a sloped ceiling.
The arc of holes in the Heater Attachment Bracket allows angle mount of the heater.
NOTE: Maximum allowed heater angle is 30°
Fasten an assembled mounting bracket to each end of the Heater Support Bracket
[supplied on heater] using two ¼" bolts supplied.
13
2100 / IO-100 Manual
IM110107
RD: AUG 2021
R.L. 11A
Advertisement
Table of Contents
