Table of Contents
Advertisement
Figure 3: INDOOR - MOUNTING CLEARANCES [Outdoor Clearances Page 7]
NOTE: MAXIMUM HEATER ANGLE IS 30° TO AVOID DAMAGE
Table 3: INDOOR - MINIMUM MOUNTING & CLEARANCES TO COMBUSTIBLES
MODEL NO
2135 / IO-135 -N\L
2150 / IO150 -N\L; 2152 / IO-152 -N
The clearance to combustible material represents the minimum distance that must be main-
tained between the outer heater surface and a nearby surface. The stated clearance to com-
bustibles represents a surface temperature of 90F° [50C°] above indoor room temperature.
It is the installer's responsibility to ensure that building materials with a low heat tolerance
which may degrade at lower temperatures are protected to prevent degradation. Examples of
low heat tolerance materials include awnings, vinyl siding, fabrics, some plastics, filmy materi-
als, etc.
Note: Do not store or place anything directly under heater
Ensure mounting height in any location is sufficient to prevent patrons from
coming in contact with heater, and clearance to combustibles is maintained.
Table 4: INDOOR - SUGGESTED MOUNTING HEIGHT FOR COMFORT
MOUNTING
PARAMETERS ***
Mounting angle
Suggested height above deck/floor
Ends
Under
HORIZONTAL
E
U
14"
45"
18"
14"
60"
21"
MODEL
2135 / IO-135
35,000 Btuh
Horizontal
9' 6"
10
UP TO MAXIMUM 30°
A
S
18"
20"
23"
25"
2150/2152 / IO-150/152
0
30
Horizontal
9' 0"
10' 6"
ANGLE
T
B
F
11"
60"
10"
62"
MODEL
50,000 Btuh
0
30
10' 0"
2100 / IO-100 Manual
IM110107
RD: AUG 2021
R.L. 11A
Advertisement
Table of Contents
